HOME > Product > Welding equipment > SANARC DRYTUBE

Welding equipment

SANARC DRYTUBE

SANARC DRYTUBE

"SANARC DRYTUBE" is a shield gas hose for the MAG and TIG welding.  Moisture in the hose can be discharged with gas purge for a short time. Moreover, it is lighter than a past rubber hose (about 60%).  The generation of the blow hall by the moisture influence can be decreased when aluminum is welded.

Commodity name

SANARC DRYTUBE

Apprications

Shield gas hose for the MAG and TIG welding

Features

1. Moisture in the hose can be discharged with gas purge for a short time (about 3 min).

2. The generation of the blow hall by the moisture influence can be decreased when aluminum is welded.

3. It is lighter than the rubber hose and excels in durability and heatproof.
(40% light in 20m comparison. )

4. It is a resin hose no cracking by the aged deterioration (ozone crack). It is three layer structure. The first layer has an inside water-shedding quality. The second layer and the third layer prevents penetration of the atmosphere from the outside. Especially, the penetration of carbon dioxide with a large transmission coefficient is prevented, and the shield gas purity is maintained.

Specification
Item Specification Note
Applied gas Shielding gas for welding Ar,Ar+H2,CO2,O2,He
Pressure range 1.0 MPa or less  
Dimensions outside diameter: 11㎜、inside diameter: 6㎜  
Joint geometry 9/16-18UNF  
Minimum radius 42㎜ (20℃)
Operating temperature limit 0-50℃  
to the Top