HOME > Product > Plasma Cutting Machine > Plasma bevel cutting machine [ KT-790PJX ]

Plasma Cutting Machine

Plasma bevel cutting machine [ KT-790PJX ]

Plasma bevel cutting machine [ KT-790PJX ]
High productivity brought out at cutting shops!

Outstanding features of KT-790PMX, which is being well-reputed because of high-quality beveling and cost saving by fast plasma-cutting process, are inherited to KT-790PJX. And KT-790PJX has realized further higher workability to meet demands from cutting shops.
KT-790PJX, that has been reduced its cost by using newly developed Beveling Unit and has been downsized, surely shall provide great productivity to International market widely.

Down Load

Adobe® Reader® is necessary to read PDF file.


1. New bevel cutting unit

Newly developed RA(Rotate/Angle) style bevel cutting unit, which is lighter/smaller/higher-rigid than conventional High Speed Link Style and TCL Style, is employed to improve not only movement speed, but maintenability as well.

2. Improved operability

PCNC(FANUC FS31iB+Panel i) is adopted to enhance Drawing Function. Real-time Drawing Function that shows you the current cutting-position and total cutting time while running a program, Document Viewer Function that can see Manuals on the screen, these two functions have been available on the machine.

3. Improved cutting quality

Newly developed Cut-condition Setting Function utilizing functions of PCNC enables you to set Cutting Conditions (AC current/Flow rate/etc) through NC controller. You can select Cutting material, Material thickness, Type of corner rope through NC controller, and the cutting can be done with much more suitable conditions.

KT-790PJX Main Specifications
 Rail span  
 Effective cutting width
 Rail span -1000mm
 Rail length

 Up to 50,000mm
 (Without cable-bearer less friction device)

 Up to 100,000mm
 (With cable-bearer less friction device)

 Effective cutting length
 Rail length -3,000mm

 Rail/rack size
 37 Kg/m rail (CP6) / 50Kg/m rail (CP6, CP10 and CP16)

 NC controller

 FANUC 31iB + Panel i

Speed specifications
 Cutting Speed      :0~10,000mm/min

 Rapid speed        : 30,000mm/min

 Manual rapid speed  : 12,000mm/min

 Cutting head lift up/down speed  :18,000mm/min

 Plasma Cutting apparatus
Standard functions

-Bevel cutting unit (RA style)
-Initial height controller
-Cutting height controller (Arc height control style)
-Coordinate rotation function
-Scheduled operation function
-Operator's deck
-Area sensor

Optional functions

-Stainless steel cutting
-R-chamfering function (Only for PEGASUS 500)
-Bottom 40 degree beveling function (Only for PEGASUS 500)
-Powder marking device
-Ink-jet marking device
-Positioning camera
-Dust collector (Stand-alone type)

to the Top