HOME > Product > Automatic pipe welding machine > Plasma Pipe Automatic Welding Machine. "PlasMan"

Automatic pipe welding machine

Plasma Pipe Automatic Welding Machine. "PlasMan"

Plasma Pipe Automatic Welding Machine.

By concentrating TIG arc with a special nozzle, "PlasMan" is a pipe automatic welding machine that can use the plasma arc heat source of a high energetic density. The welding parts of less heat distortion is obtained.

Product name

PlasMan Model 07

Apprications

Pipe weldings of general piping and shipbuilding piping, etc.

Features

1. The pipe automatic welding machine that use the plasma arc heat source

（Features of Plasma welding）

  • The speedy welding with a less heat distortion is possible, because the arc is high density.
  • The non-spatter welding is possible. It is used for the product with high quality.
  • Don't need V bevel edge preparation, because I shape Butt welding is possible.

2. "The high performance one pass back bead" welding of difficult SUS316L used by shipbuilding became possible in the TIG welding. The keyhole back bead welding became possible without U shape edge preperation like a TIG welding. As a result, the welding efficiency became twice or more.

3. A tack weld and the repair welding can be used as TIG welding machine.

Specifications
Model type PlasMan (Model: 07)
Input voltage 200V，50/60Hz (3-phase)
Welding current 4-300A
Pilot current 3-15A
Plasma gas flow rate Mass flow control (Max.5L / min)
Usage rate 40%
Dimention D800×H800×W700(mm)
Weight About 140 kg
With built-in cooling water
Plasma / TIG welding fucnctions Plasma welding（automatic operation only）
TIG welding (manual operation & automatic operation)
Note Printer, Tack welding torch, Remote pendant with 24m long cable
to the Top